BITCOIN MINER LINUX UBUNTU – Premwehpho17

[ANN][ANDROID MINING][AIRDROP] NewEnglandcoin: Scrypt RandomSpike

New England
New England 6 States Songs: https://www.reddit.com/newengland/comments/er8wxd/new_england_6_states_songs/
NewEnglandcoin
Symbol: NENG
NewEnglandcoin is a clone of Bitcoin using scrypt as a proof-of-work algorithm with enhanced features to protect against 51% attack and decentralize on mining to allow diversified mining rigs across CPUs, GPUs, ASICs and Android phones.
Mining Algorithm: Scrypt with RandomSpike. RandomSpike is 3rd generation of Dynamic Difficulty (DynDiff) algorithm on top of scrypt.
1 minute block targets base difficulty reset: every 1440 blocks subsidy halves in 2.1m blocks (~ 2 to 4 years) 84,000,000,000 total maximum NENG 20000 NENG per block Pre-mine: 1% - reserved for dev fund ICO: None RPCPort: 6376 Port: 6377
NewEnglandcoin has dogecoin like supply at 84 billion maximum NENG. This huge supply insures that NENG is suitable for retail transactions and daily use. The inflation schedule of NengEnglandcoin is actually identical to that of Litecoin. Bitcoin and Litecoin are already proven to be great long term store of value. The Litecoin-like NENG inflation schedule will make NewEnglandcoin ideal for long term investment appreciation as the supply is limited and capped at a fixed number
Bitcoin Fork - Suitable for Home Hobbyists
NewEnglandcoin core wallet continues to maintain version tag of "Satoshi v0.8.7.5" because NewEnglandcoin is very much an exact clone of bitcoin plus some mining feature changes with DynDiff algorithm. NewEnglandcoin is very suitable as lite version of bitcoin for educational purpose on desktop mining, full node running and bitcoin programming using bitcoin-json APIs.
The NewEnglandcoin (NENG) mining algorithm original upgrade ideas were mainly designed for decentralization of mining rigs on scrypt, which is same algo as litecoin/dogecoin. The way it is going now is that NENG is very suitable for bitcoin/litecoin/dogecoin hobbyists who can not , will not spend huge money to run noisy ASIC/GPU mining equipments, but still want to mine NENG at home with quiet simple CPU/GPU or with a cheap ASIC like FutureBit Moonlander 2 USB or Apollo pod on solo mining setup to obtain very decent profitable results. NENG allows bitcoin litecoin hobbyists to experience full node running, solo mining, CPU/GPU/ASIC for a fun experience at home at cheap cost without breaking bank on equipment or electricity.
MIT Free Course - 23 lectures about Bitcoin, Blockchain and Finance (Fall,2018)
https://www.youtube.com/playlist?list=PLUl4u3cNGP63UUkfL0onkxF6MYgVa04Fn
CPU Minable Coin Because of dynamic difficulty algorithm on top of scrypt, NewEnglandcoin is CPU Minable. Users can easily set up full node for mining at Home PC or Mac using our dedicated cheetah software.
Research on the first forked 50 blocks on v1.2.0 core confirmed that ASIC/GPU miners mined 66% of 50 blocks, CPU miners mined the remaining 34%.
NENG v1.4.0 release enabled CPU mining inside android phones.
Youtube Video Tutorial
How to CPU Mine NewEnglandcoin (NENG) in Windows 10 Part 1 https://www.youtube.com/watch?v=sdOoPvAjzlE How to CPU Mine NewEnglandcoin (NENG) in Windows 10 Part 2 https://www.youtube.com/watch?v=nHnRJvJRzZg
How to CPU Mine NewEnglandcoin (NENG) in macOS https://www.youtube.com/watch?v=Zj7NLMeNSOQ
Decentralization and Community Driven NewEnglandcoin is a decentralized coin just like bitcoin. There is no boss on NewEnglandcoin. Nobody nor the dev owns NENG.
We know a coin is worth nothing if there is no backing from community. Therefore, we as dev do not intend to make decision on this coin solely by ourselves. It is our expectation that NewEnglandcoin community will make majority of decisions on direction of this coin from now on. We as dev merely view our-self as coin creater and technical support of this coin while providing NENG a permanent home at ShorelineCrypto Exchange.
Twitter Airdrop
Follow NENG twitter and receive 100,000 NENG on Twitter Airdrop to up to 1000 winners
Graphic Redesign Bounty
Top one award: 90.9 million NENG Top 10 Winners: 500,000 NENG / person Event Timing: March 25, 2019 - Present Event Address: NewEnglandcoin DISCORD at: https://discord.gg/UPeBwgs
Please complete above Twitter Bounty requirement first. Then follow Below Steps to qualify for the Bounty: (1) Required: submit your own designed NENG logo picture in gif, png jpg or any other common graphic file format into DISCORD "bounty-submission" board (2) Optional: submit a second graphic for logo or any other marketing purposes into "bounty-submission" board. (3) Complete below form.
Please limit your submission to no more than two total. Delete any wrongly submitted or undesired graphics in the board. Contact DISCORD u/honglu69#5911 or u/krypton#6139 if you have any issues.
Twitter Airdrop/Graphic Redesign bounty sign up: https://goo.gl/forms/L0vcwmVi8c76cR7m1
Milestones
Roadmap
NENG v1.4.0 Android Mining, randomSpike Evaluation https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/NENG_2020_Q3_report/NENG_2020_Q3_report.pdf
RandomSpike - NENG core v1.3.0 Hardfork Upgrade Proposal https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/2020Q1_Report/Scrypt_RandomSpike_NENGv1.3.0_Hardfork_Proposal.pdf
NENG Security, Decentralization & Valuation
https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/2019Q2_report/NENG_Security_Decentralization_Value.pdf
Whitepaper v1.0 https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/whitepaper_v1.0/NENG_WhitePaper.pdf
DISCORD https://discord.gg/UPeBwgs
Explorer
http://www.findblocks.com/exploreNENG http://86.100.49.209/exploreNENG http://nengexplorer.mooo.com:3001/
Step by step guide on how to setup an explorer: https://github.com/ShorelineCrypto/nengexplorer
Github https://github.com/ShorelineCrypto/NewEnglandCoin
Wallet
Android with UserLand App (arm64/armhf), Chromebook (x64/arm64/armhf): https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0.5
Linux Wallet (Ubuntu/Linux Mint, Debian/MX Linux, Arch/Manjaro, Fedora, openSUSE): https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0.3
MacOS Wallet (10.11 El Capitan or higher): https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0.2
Android with GNUroot on 32 bits old Phones (alpha release) wallet: https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0
Windows wallet: https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.3.0.1
addnode ip address for the wallet to sync faster, frequently updated conf file: https://github.com/ShorelineCrypto/cheetah_cpumineblob/mastenewenglandcoin.conf-example
How to Sync Full Node Desktop Wallet https://www.reddit.com/NewEnglandCoin/comments/er6f0q/how_to_sync_full_node_desktop_wallet/
TWITTER https://twitter.com/newenglandcoin
REDDIT https://www.reddit.com/NewEnglandCoin/
Cheetah CPU Miner Software https://github.com/ShorelineCrypto/cheetah_cpuminer
Solo Mining with GPU or ASIC https://bitcointalk.org/index.php?topic=5027091.msg52187727#msg52187727
How to Run Two Full Node in Same Desktop PC https://bitcointalk.org/index.php?topic=5027091.msg53581449#msg53581449
ASIC/GPU Mining Pools Warning to Big ASIC Miners Due to DynDiff Algo on top of Scrypt, solo mining is recommended for ASIC/GPU miners. Further more, even for mining pools, small mining pool will generate better performance than big NENG mining pool because of new algo v1.2.x post hard fork.
The set up configuration of NENG for scrypt pool mining is same as a typical normal scrypt coin. In other word, DynDiff on Scrypt algo is backward compatible with Scrypt algo. Because ASIC/GPU miners rely on CPU miners for smooth blockchain movement, checkout bottom of "Latest News" section for A WARNING to All ASIC miners before you decide to dump big ASIC hash rate into NENG mining.
(1) Original DynDiff Warning: https://bitcointalk.org/index.php?topic=5027091.msg48324708#msg48324708 (2) New Warning on RandomSpike Spike difficulty (244k) introduced in RandomSpike served as roadblocks to instant mining and provide security against 51% attack risk. However, this spike difficulty like a roadblock that makes big ASIC mining less profitable. In case of spike block to be mined, the spike difficulty immediately serve as base difficulty, which will block GPU/ASIC miners effectively and leave CPU cheetah solo miners dominating mining almost 100% until next base difficulty reset.
FindBlocks http://findblocks.com/
CRpool http://crpool.xyz/
Cminors' Pool http://newenglandcoin.cminors-pool.com/
SPOOL https://spools.online/
Exchange
📷
https://shorelinecrypto.com/
Features: anonymous sign up and trading. No restriction or limit on deposit or withdraw.
The trading pairs available: NewEnglandcoin (NENG) / Dogecoin (DOGE)
Trading commission: A round trip trading will incur 0.10% trading fees in average. Fees are paid only on buyer side. buy fee: 0.2% / sell fee: 0% Deposit fees: free for all coins Withdraw fees: ZERO per withdraw. Mining fees are appointed by each coin blockchain. To cover the blockchain mining fees, there is minimum balance per coin per account: * Dogecoin 2 DOGE * NewEnglandcoin 1 NENG
Latest News Aug 30, 2020 - NENG v1.4.0.5 Released for Android/Chromebook Upgrade with armhf, better hardware support https://bitcointalk.org/index.php?topic=5027091.msg55098029#msg55098029
Aug 11, 2020 - NENG v1.4.0.4 Released for Android arm64 Upgrade / Chromebook Support https://bitcointalk.org/index.php?topic=5027091.msg54977437#msg54977437
Jul 30, 2020 - NENG v1.4.0.3 Released for Linux Wallet Upgrade with 8 Distros https://bitcointalk.org/index.php?topic=5027091.msg54898540#msg54898540
Jul 21, 2020 - NENG v1.4.0.2 Released for MacOS Upgrade with Catalina https://bitcointalk.org/index.php?topic=5027091.msg54839522#msg54839522
Jul 19, 2020 - NENG v1.4.0.1 Released for MacOS Wallet Upgrade https://bitcointalk.org/index.php?topic=5027091.msg54830333#msg54830333
Jul 15, 2020 - NENG v1.4.0 Released for Android Mining, Ubuntu 20.04 support https://bitcointalk.org/index.php?topic=5027091.msg54803639#msg54803639
Jul 11, 2020 - NENG v1.4.0 Android Mining, randomSpike Evaluation https://bitcointalk.org/index.php?topic=5027091.msg54777222#msg54777222
Jun 27, 2020 - Pre-Announce: NENG v1.4.0 Proposal for Mobile Miner Upgrade, Android Mining Start in July 2020 https://bitcointalk.org/index.php?topic=5027091.msg54694233#msg54694233
Jun 19, 2020 - Best Practice for Futurebit Moonlander2 USB ASIC on solo mining mode https://bitcointalk.org/index.php?topic=5027091.msg54645726#msg54645726
Mar 15, 2020 - Scrypt RandomSpike - NENG v1.3.0.1 Released for better wallet syncing https://bitcointalk.org/index.php?topic=5027091.msg54030923#msg54030923
Feb 23, 2020 - Scrypt RandomSpike - NENG Core v1.3.0 Relased, Hardfork on Mar 1 https://bitcointalk.org/index.php?topic=5027091.msg53900926#msg53900926
Feb 1, 2020 - Scrypt RandomSpike Proposal Published- NENG 1.3.0 Hardfork https://bitcointalk.org/index.php?topic=5027091.msg53735458#msg53735458
Jan 15, 2020 - NewEnglandcoin Dev Team Expanded with New Kickoff https://bitcointalk.org/index.php?topic=5027091.msg53617358#msg53617358
Jan 12, 2020 - Explanation of Base Diff Reset and Effect of Supply https://www.reddit.com/NewEnglandCoin/comments/envmo1/explanation_of_base_diff_reset_and_effect_of/
Dec 19, 2019 - Shoreline_tradingbot version 1.0 is released https://bitcointalk.org/index.php?topic=5121953.msg53391184#msg53391184
Sept 1, 2019 - NewEnglandcoin (NENG) is Selected as Shoreline Tradingbot First Supported Coin https://bitcointalk.org/index.php?topic=5027091.msg52331201#msg52331201
Aug 15, 2019 - Mining Update on Effect of Base Difficulty Reset, GPU vs ASIC https://bitcointalk.org/index.php?topic=5027091.msg52169572#msg52169572
Jul 7, 2019 - CPU Mining on macOS Mojave is supported under latest Cheetah_Cpuminer Release https://bitcointalk.org/index.php?topic=5027091.msg51745839#msg51745839
Jun 1, 2019 - NENG Fiat project is stopped by Square, Inc https://bitcointalk.org/index.php?topic=5027091.msg51312291#msg51312291
Apr 21, 2019 - NENG Fiat Project is Launched by ShorelineCrypto https://bitcointalk.org/index.php?topic=5027091.msg50714764#msg50714764
Apr 7, 2019 - Announcement of Fiat Project for all U.S. Residents & Mobile Miner Project Initiation https://bitcointalk.org/index.php?topic=5027091.msg50506585#msg50506585
Apr 1, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange https://bitcointalk.org/index.php?topic=5027091.msg50417196#msg50417196
Mar 27, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange https://bitcointalk.org/index.php?topic=5027091.msg50332097#msg50332097
Mar 17, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange https://bitcointalk.org/index.php?topic=5027091.msg50208194#msg50208194
Feb 26, 2019 - Community Project - NewEnglandcoin Graphic Redesign Bounty Initiated https://bitcointalk.org/index.php?topic=5027091.msg49931305#msg49931305
Feb 22, 2019 - Dev Policy on Checkpoints on NewEnglandcoin https://bitcointalk.org/index.php?topic=5027091.msg49875242#msg49875242
Feb 20, 2019 - NewEnglandCoin v1.2.1 Released to Secure the Hard Kork https://bitcointalk.org/index.php?topic=5027091.msg49831059#msg49831059
Feb 11, 2019 - NewEnglandCoin v1.2.0 Released, Anti-51% Attack, Anti-instant Mining after Hard Fork https://bitcointalk.org/index.php?topic=5027091.msg49685389#msg49685389
Jan 13, 2019 - Cheetah_CpuMiner added support for CPU Mining on Mac https://bitcointalk.org/index.php?topic=5027091.msg49218760#msg49218760
Jan 12, 2019 - NENG Core v1.1.2 Released to support MacOS OSX Wallet https://bitcointalk.org/index.php?topic=5027091.msg49202088#msg49202088
Jan 2, 2019 - Cheetah_Cpuminer v1.1.0 is released for both Linux and Windows https://bitcointalk.org/index.php?topic=5027091.msg49004345#msg49004345
Dec 31, 2018 - Technical Whitepaper is Released https://bitcointalk.org/index.php?topic=5027091.msg48990334#msg48990334
Dec 28, 2018 - Cheetah_Cpuminer v1.0.0 is released for Linux https://bitcointalk.org/index.php?topic=5027091.msg48935135#msg48935135
Update on Dec 14, 2018 - NENG Blockchain Stuck Issue https://bitcointalk.org/index.php?topic=5027091.msg48668375#msg48668375
Nov 27, 2018 - Exclusive for PC CPU Miners - How to Steal a Block from ASIC Miners https://bitcointalk.org/index.php?topic=5027091.msg48258465#msg48258465
Nov 28, 2018 - How to CPU Mine a NENG block with window/linux PC https://bitcointalk.org/index.php?topic=5027091.msg48298311#msg48298311
Nov 29, 2018 - A Warning to ASIC Miners https://bitcointalk.org/index.php?topic=5027091.msg48324708#msg48324708
Disclosure: Dev Team Came from ShorelineCrypto, a US based Informatics Service Business offering Fee for service for Coin Creation, Coin Exchange Listing, Blockchain Consulting, etc.
submitted by honglu69 to NewEnglandCoin [link] [comments]

How to Mine BiblePay on Linux

This guide is outdated, please refer to:
https://wiki.biblepay.org/POBH_Setup
https://wiki.biblepay.org/PODC_Setup
 
 
 
 
 
 
 
 
IMPORTANT - Evolution Upgrade:
Quick Start https://wiki.biblepay.org/Quick_Start
Evolution Upgrade Information https://wiki.biblepay.org/Evolution_Upgrade
Getting Started with Evolution https://wiki.biblepay.org/Getting_Started_with_Evolution
Generic Smart Contracts https://wiki.biblepay.org/Generic_Smart_Contracts
What is BiblePay Evolution? https://www.reddit.com/BiblePay/comments/bifvpk/biblepay_evolution_what_is_it/
Recommend 2GB RAM or can get stuck compiling (if 1GB RAM can use Swap File) Use Ubuntu 16.04
INFO
https://github.com/biblepay/biblepay-evolution/blob/masteBuildBiblePay.txt
INSTALL COMMANDS
apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils apt-get install libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-program-options-dev libboost-test-dev libboost-thread-dev apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler apt-get install git apt-get install curl build-essential libtool autotools-dev automake pkg-config python3 bsdmainutils cmake sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev git clone http://github.com/biblepay/biblepay-evolution prefix=x86_64-pc-linux-gnu cd biblepay-evolution/depends make -j4 # Choose a good -j value, depending on the number of CPU cores available cd .. ./autogen.sh #Note: if echo `pwd` does not return your working directory, replace it with your working directory such as /biblepay-evolution/ ./configure --prefix `pwd`/depends/x86_64-pc-linux-gnu make # See more here: #https://github.com/biblepay/biblepay-evolution/blob/mastedoc/build-unix.md 

SWAP FILE
NOTE: if server is 1GB RAM, before running last command "sudo make", set up a swap file
free #check if swap is 0 dd if=/dev/zero of=/vaswap.img bs=1024k count=1000 mkswap /vaswap.img swapon /vaswap.img free #check if swap is 1024 sudo make 

RUN COMMAND LINE
cd src ./biblepayd -daemon 
OR
RUN GUI
Your GUI program will be located in: /biblepay-evolution/src/qt
./biblepay-qt 
You can also run it in the background (to free up your terminal) if you call it with:
./biblepay-qt & 
To start mining, instructions are the same as for Windows: Go to Tools -> Debug Console
Execute this command (to start mining with 8 threads)
setgenerate true 8 
From there you can use all other commands such as getmininginfo, getwalletinfo, etc. Execute help command to get the list of all available commands.
Note: GUI will be built automatically only if you meet the requirements for qt library, i.e. make sure you ran this line before compiling:
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler 
BIBLEPAY is now Running!

SETUP CONFIG
Stop BiblePay and set up the config file to get starting nodes to sync with and enable mining:
./biblepay-cli stop cd ~/.biblepayevolution/ vi biblepay.conf addnode=node.biblepay.org gen=1 genproclimit=1 
Escape Key + : (Colon Key) + w + q + Enter (saves file and quits)

addnode --- adds a node to the list of nodes to connect to gen=1 --- turns on mining genproclimit --- sets number of threads to use when mining

Run BiblePay again and fully sync with network
cd ../biblepay-evolution/src ./biblepayd -daemon ./biblepay-cli getinfo 

USEFUL COMMANDS
./biblepay-cli help ./biblepay-cli getaccountaddress "" ./biblepay-cli getinfo ./biblepay-cli getmininginfo ./biblepay-cli setgenerate true 8 ./biblepay-cli sendtoaddress "insertAddressHere" 777 "" "" true ./biblepay-cli stop ./biblepayd -daemon top #CPU usage q to quit 

MINING THREADS: To change number of threads to use up for mining
a. Edit home/yourusername/.biblepayevolution/biblepay.conf file:
genproclimit=X 
and restart BiblePay -or- b. Menu >> Tools >> Debug Console >> Type command:
setgenerate true X 
(Replace X with number of threads Use top command to view CPU usage)

POOL
NOTE: To use the pool you must now use the external miner, not the wallet miner https://whitewalr.us/2019/biblepay-nomp-pool-mining.html
  1. Set up an account on pool website: https://pool.biblepay.org/
  2. Create Worker Username(s) - Workers tab >>> Add
  3. Enable pool and add Worker Username in ~/.biblepayevolution/biblepay.conf file, add these lines and save:
    pool=https://pool.biblepay.org workerid=insertWorkerUsernameHere
4. Restart BiblePay
./biblepay-cli stop ./biblepayd -daemon 
Setup Auto-Withdraw Navigate to Account >>> Account Settings >>> Verify your BBP Receiving Address >>> Click Authorize-Auto-Withdraws

UPDATE:

### Turn off/stop BiblePay
cd /home/yourname/biblepay-evolution/src ./biblepay-cli stop 

### Pull down latest Biblepay code and build it
cd /home/yourname/biblepay-evolution git pull origin master sudo make 

### Turn BiblePay back on and check version number
cd src ./biblepayd -daemon ./biblepay-cli getinfo ./biblepay-cli setgenerate true 8 

UPDATE IN ONE COMMAND:
./biblepay-evolution/src/biblepay-cli stop ; cd && cd biblepay-evolution/ && git pull origin master && sudo make && cd src && ./biblepayd -daemon && sleep 90 && ./biblepay-cli getmininginfo 
Note: the ";" says do this after, regardless of the outcome Note: && says do this after only if previous command finished with no errors

SPEED UP COMPILE:
To speed up the compile time, add -j4 or -j8 after make. This way it compiles using 4 or 8 threads instead of just 1.
./configure LDFLAGS="-L${BDB_PREFIX}/lib/" CPPFLAGS="-I${BDB_PREFIX}/include/" sudo make -j8 
Reference: http://www.linux-databook.info/?page_id=2319

RSYNC stop biblepay from your nodes compile on your fastest machine then rsync with your machines only src folder is required
rsync -avuz /root/biblepay-evolution/src/ [email protected]:/root/biblepay-evolution/src/ 
https://stackoverflow.com/questions/3299951/how-to-pass-password-for-rsync-ssh-command https://www.thegeekstuff.com/2008/11/3-steps-to-perform-ssh-login-without-password-using-ssh-keygen-ssh-copy-id/
people make cron jobs and rsync automatically

OUTDATED

Unofficial Bash Script
https://gist.github.com/anonymous/d1c1d35e3c8f67f5fb2e204479fa5c6b

Official Ubuntu Package
https://launchpad.net/~biblepay-official

Unofficial Ubuntu Package
https://www.reddit.com/BiblePay/comments/7rwqqs/unofficial_ubuntu_packages_available/

Unofficial Mine in One Line
https://www.reddit.com/BiblePay/comments/7ryuk1/mine_in_one_line/
NOTE: DONT RUN ON A COMPUTER WITH COINS -- THIS IS A CLEAN INSTALL SCRIPT

COMPILE WITHOUT GUI: https://bitcointalk.org/index.php?topic=2042657.msg21878317#msg21878317 https://bitcointalk.org/index.php?topic=2042657.msg21878389#msg21878389
ADVANCED:

DOCKER IMAGES (NOTE: I havent tested these, use at your own risk) https://hub.docker.com/gagaha/biblepay/ https://hub.docker.com/cryptozero/biblepay-opt/
submitted by togoshige to BiblePay [link] [comments]

DECENT MINING SETUP & RESSOURCES SHORTCUT

To all DECENTants,
I would like to encourage you to become a seeder or witness (actually not miner) on DECENT.

SHORT INTRODUCTION ABOUT ME

As a pioneer with Bitcoin I truly believed in the DCT project and it's proposal. The first day of the ICO release I sent all my BTC balance to the DECENT. Not knowing when and what they will deliver. To participate in this great adventure means a lot to me. Another project from my home country I strongly encourage you to get familiar with is Ethereum. I have been an early CPU miner: before Crypto Currency I used to compute for sience projects grid for Clean Water and Cancer Research. If I hadn't bought Rainforest with the Ripple they distributed to all contributors, I'd be a rich man today. :P

DECENT SUPPORT

https://decent.ladesk.com/

DECENT WIKI

https://wiki.decent.ch/doku.php?id=decent:howto#build_decent_from_source

DECENT GITHUB

https://github.com/DECENTfoundation/DECENT-Network

BLOCK EXPLORER

https://explorer.decent.ch/

DECENT DB

https://decent-db.com/

GRAPHENE CLI Wallet Cookbook

https://github.com/bitshares/bitshares-core/wiki/CLI-Wallet-Cookbook

RESSOURCES

https://www.digitalocean.com/community/tutorials/initial-server-setup-with-ubuntu-16-04
http://www.hamvocke.com/blog/a-quick-and-easy-guide-to-tmux/
https://digitizor.com/create-swap-file-ubuntu-linux/

I - SERVER SETUP

A dedicated server with Linux Ubuntu 16.04 LTS is most recommend for 24/7 operation. I suggest you close the root and create a new user with SSH Key, secure the system with a firewall.

1. Create a new user

adduser bob 

2. Elevate him

usermod -aG sudo bob 

3. Generate a new keyset

ssh-keygen 

4- Bind the new keys

ssh-copy-id [email protected]_server_ip 
Copy the keys to your local drive. You'll need them to connect.

5. Change the config file

sudo nano /etc/ssh/sshd_config 
Change Line PasswordAuthentication no

6. Finish with

sudo systemctl reload sshd 

7. Login with your ssh key, user and password

ssh [email protected]_server_ip 

II - PREREQUISITES

1. Grab your tools

sudo apt-get update sudo apt-get install build-essential autotools-dev automake autoconf libtool make cmake checkinstall realpath gcc g++ flex bison doxygen gettext git qt5-default libqt5svg5-dev libreadline-dev libcrypto++-dev libgmp-dev libdb-dev libdb++-dev libssl-dev libncurses5-dev libboost-all-dev libcurl4-openssl-dev python-dev libicu-dev libbz2-dev 

2. Download and build Boost 1.60.0

mkdir -p ~/dev/DECENTfoundation/DECENT-Network-third-party cd ~/dev/DECENTfoundation/DECENT-Network-third-party rm -rf boost_1_60_0* boost-1.60.0* wget https://sourceforge.net/projects/boost/files/boost/1.60.0/boost_1_60_0.tar.gz tar xvf boost_1_60_0.tar.gz mkdir boost-1.60.0_prefix cd boost_1_60_0 export BOOST_ROOT=$(realpath ../boost-1.60.0_prefix) ./bootstrap.sh --prefix=$BOOST_ROOT ./b2 install cd .. rm -rf boost_1_60_0 boost_1_60_0.tar.gz 

III - INSTALLATION

1. Clone the repo

mkdir -p ~/dev/DECENTfoundation cd ~/dev/DECENTfoundation #via ssh $ git clone [email protected]:DECENTfoundation/DECENT-Network.git #via url $ git clone https://github.com/DECENTfoundation/DECENT-Network.git cd DECENT-Network git submodule update --init --recursive 

2. Build and install Decent

mkdir -p ~/dev/DECENTfoundation/DECENT-Network-build cd ~/dev/DECENTfoundation/DECENT-Network-build cmake -G "Unix Makefiles" -D CMAKE_BUILD_TYPE=Debug ~/dev/DECENTfoundation/DECENT-Network cmake --build . --target all -- -j -l 3.0 cmake --build . --target install 

IV - USE DECENT

You don't want your server to shut down the process when you lose connection or quit.
I use tmux. Though nohup is sufficient for infrequent access. Use it when you fire up decentd after miner setup.
nohup ./decentd & disown 

1. RUN decentd - On first run decentd will create .decent in the home directory.

~/dev/DECENTfoundation/DECENT-Network-build/artifacts/prefix/bin/decentd 
Always close it via Ctrl+C to save the current state Ctrl+S Freeze Ctrl+Q Resume

2. Get HELP

cd ~/dev/DECENTfoundation/DECENT-Network-build/artifacts/prefix/bin/ ./decentd -h 

3. RUN cli_wallet

~/dev/DECENTfoundation/DECENT-Network-build/artifacts/prefix/bin/cli_wallet 
Close it with Ctrl+D

4. USE cli_wallet

set_password xy unlock xy 

5. IMPORT your account

import_key decentgo_username your_private_key 

6. CREATE 3 sets of keys for your new account

suggest_brain_key 
write them down, don't use the ones below. ;)

1. new owner key

{ "brain_priv_key1": "UNBUSH ROAR CHKALIK STRUE PLATTEN DEMOB COLETIT DECAYER SPERONE SPASMED ANATASE LAGGARD BESPETE AXOID SERAL CHEKI", "wif_priv_key1": "5J4brX9bydADigEtsXZhCZ1YLVXkq8frp4xcKAREQ3Gh3P2DE7e", "pub_key1": "DCT5VNJni7HypYi159qiwazZ1WZUt4p2v7NLQmFCJPDvjBpW2oG8a" } 

2. new active key

{ "brain_priv_key2": "FUSION BLART JAIL FESTAL LAXNESS ROSTEL TITI VANADYL PUG BATATA KAIK ROSETY STUCCO TETE BEMUDDY WUDGE", "wif_priv_key2": "5HvsjRsokHSeeUdRkM88JgLzYJ6vnc2e35CzyZNRnmh1fvm91Jz", "pub_key2": "DCT7G7KeUnMPVKXN2y8M7BnyosLRE3LtSnNp7kbxtYd9xHiBoX6wd" } 

3. new public signing key

{ "brain_priv_key3": "DECESS LABBA PLAN DEHUSK FISTY MOSSER SPURTER SCORIAE INDART UNDYE MASTER STEIGH SAFROLE FLURR THAPSIA JOB", "wif_priv_key3": "5JgMsecySgt2BQsmmEE9QnwAGuudC9fGeZJhreyPatcu2TVY9bs", "pub_key3": "DCT6D7TLeVJmPQWR73XHvEhTVHzTDoG6oTSUyvfGa58nuc5wL96UH" } 

7. CREATE your new account

register_account new_username pub_key1 pub_key2 decentgo_username true 

8. SEND some DCT to your new account

transfer decentgo_username target_username 3.00 DCT "memo" true 

9. IMPORT the new account

import_key new_username wif_priv_key2 

10. Close the Wallet and edit the config.ini inside /root/.decent/data/decentd/

private-key = ["pub_key2","wif_priv_key2"] 

11. Launch again and create your miner

create_miner username "proposal URL" true 

12. Change your signing key to 3rd keypair from suggest_brain_key

update_miner username "proposal URL" public_key3 true 

13. Edit the config.ini again inside /root/.decent/data/decentd/

enable-stale-production = true miner-id = "1.4.X" private-key = ["pub_key3","wif_priv_key3"] 

Your Server is now ready to run a DECENT witness.

Be aware that you should not close your daemon at any time.

V - USEFUL COMMANDS

get_brain_key_info dump_private_keys get_private_key public-key get_account texxi get_miner texxi list_my_accounts list_account_balances texxi set_desired_miner_count username 99 

Now get some support for your miner and join the community!

https://decent-project.slack.com/

You can vote for me and I will gladly return the favor. Please make sure your server runs stable and you're not missing any blocks. Good Luck!

vote_for_miner username texxi true true

All voters will receive early preview access to my first cryptocurrency trading tool to be released in 2018. But remember: Always trade for good and invest in green.

submitted by Texxer to Decentplatform [link] [comments]

Mjollnircoin is released! A new open-source peer-to-peer crypto currency. Ultra-secure, Fast Transactions & ASIC resistant Crypto currency

Today we have released Mjollnircoin , a decentralized digital currency that enables instant payments to anyone in the world; it is a lite version of Bitcoin using a redundant cryptographic function as a proof-of-work algorithm. Mjollnircoin is a people's currency, intended to be efficiently mined with consumer-grade hardware. It is ultra secure, ASIC resistant, Multipool resistant and rare with a total number of 42 million mjollnircoins.
Mjollnircoin uses peer-to-peer technology to operate with no central authority or banks; managing transactions and the issuing of mjollnircoins is carried out collectively by the network. There is no concept of ownership (nobody controls or owns the Mjollnircoin network) and there are no restrictions on who can take part.
Specification
For Windows, Mac OX and Ubuntu there are wallets available at http://brokkir.github.io/mjollnircoin/wallet.html. The source code of Mjollnircoin and related projects is at https://github.com/brokkir
Pools
Miners
Social
Exchange
First Announced in https://bitcointalk.org/index.php?topic=577437.0
submitted by Mjollnircoin to Mjollnircoin [link] [comments]

Using 2 GPUs with DiabloMiner - only detects 1 GPU?

I'm trying to use DiabloMiner on Ubuntu 11.04 with a 6970 and a 5830 . Aticonfig detects both devices, but when I start hashing i barely get over 200 mhash/s and if i check the loads/fanspeed only the 5830 is being used. Any suggestions? I'm willing to donate bitcoin for a solution...
submitted by disinfestator to Bitcoin [link] [comments]

Using 2 GPUs with DiabloMiner - only detects 1 GPU? (xpost from /r/bitcoin)

I'm trying to use DiabloMiner on Ubuntu 11.04 with a 6970 and a 5830 . Aticonfig detects both devices, but when I start hashing i barely get over 200 mhash/s and if i check the loads/fanspeed only the 5830 is being used. The 6870 is the GPU im currently "using", i.e my monitor is plugged into it, but oddly enough the 5830 is the only one DiabloMiner wants to use. Any suggestions? I'm willing to donate bitcoin for a solution...
I have tried using the --devices flag, but the only one that works is if i set it to 1 , if i try to open two terminal windows and use 0 in the first one and 1 in the other, only the "1" instance produces hashes and "0" does nothing.
submitted by disinfestator to BitcoinMining [link] [comments]

Bitcoin Miner Block erupter Ubuntu tutorial minar bitcoin con nicehash en ubuntu Bitcoin ASICMiner Block Erupter USB CGMINER Setup/ tutorial Ubuntu How To Install BitCoin On Ubuntu 16.04 How to install BFGminer on Ubuntu 17.04

11.04. bitcoin with Unity doesnt work due to an issue with Compiz - this is the bug report. This issue has been discussed with a few suggestions on the bitcoin forums. In summary - if you dont want to install . a new versions of bitcoin either via ppa's or from the latest source on the bitcoin website, or; update the wxwidget libraries, you should logout of Unity and choose the session "Ubuntu ... Ubuntu 20.04 LTS (Focal Fossa) Ubuntu Universe amd64 ... multi-threaded multi-pool Bitcoin miner: Ubuntu Universe i386 Official: cgminer_4.9.2-1build1_i386.deb: multi-threaded multi-pool Bitcoin miner: Ubuntu 14.04 LTS (Trusty Tahr) Ubuntu Universe amd64 Official: cgminer_3.11.0-1_amd64.deb: multi-threaded multi-pool Bitcoin miner: Ubuntu Universe arm64 Official: cgminer_3.11.0-1_arm64.deb ... Zcash Miner Power Comparison AMD Fury9 vs. RX480 Using Claymore 11.1 on Linux Bitcoin Mining at Scale How to Build a Zcash Miner on Ubuntu Linux with How to Mine Bitcoins with BFG Miner on Ubuntu? Introduction Bitcoin is a cryptocurrency which is quite popular among many investors, tech enthusiasts, and some digital sellers/buyers due to its flexible, anonymous and robust nature. Présentation ... bitcoin python OpenCL mining setup on Ubuntu 11.04 Posted by yongsun June 8, 2011 June 23, 2011 6 Comments on bitcoin python OpenCL mining setup on Ubuntu 11.04 Credits : Thanks to Syke's article on forum.bitcoin.org !!! Mining Guide for Ubuntu Natty Narwhal 11.04 />

[index] [26727] [17101] [36783] [24243] [49409] [18783] [12462] [36476] [25091] [45105]

Bitcoin Miner Block erupter Ubuntu tutorial

This video covers the method to install BitCoins on Ubuntu 16.04 Bitcoin is a virtual and crypto-currency created by Satoshi Nakamoto. For more explanation o... BitCoin mining on Ubuntu using specialized ASIC procesors and Ubuntu software such as: CGMiner, BFGMiner, EasyMiner https://linuxhint.com/best-usb-bitcoin-mi... How to mine Bitcoin/Litecoin using Ubuntu 14.04 In this video I show you how to mine bitcoin and litecoin while using ubuntu 14.04 please if you have any questions or concerns feel free to comment ... Bitcoin Mining Software 2019 7,301 views 24:00 How to toutorial minergate mining with CPU/GPU (VPS UBUNTU 2017-2018) eobot ico what is monero - Duration: 12:17. How to Bitcoin Miner with Ubuntu VPS - Setup Nicehash Miner via Ubuntu VPS - Duration: 11:33. Cát Dự Trần 47,543 views. 11:33. How to Set Up a Bitcoin Mining Rig w/ BITMAIN ANTMINER U2 ...

#